Icom IC-A120E Airband VHF Mobile Kit

$1,664.00
RRP $1,730.00
SAVE $66.00 (4%)
In Stock

Icom IC-A120E Airband VHF Transceiver Mobile Kit
 
Everything you need to set up the IC-A120E Airband VHF Transceiver in your vehicle. Comes with the IC-A120E Radio, DC power cable, fuses, A120E mounting bracket kit, hand microphone and hanger, and a 545mm Mobile VHF Stainless Whip Antenna with a Magnetic Base.
 
Supplied in the Kit
 
  • IC-A120E VHF Air Band Transceiver
  • HM-216 Hand Microphone
  • DC power cable
  • Mounting bracket kit
  • Microphone hanger kit
  • Fuses
  • M1MBSW124KIT Mobile VHF Antenna Kit w/ Magnetic Base & Stainless Whip Antenna
 
IC-A120E
High Visibility, Simple Operation
The full dot-matrix LCD allows for high visibility and clearly shows alphanumeric characters and icons. Programming memory channels and other radio settings can be simply made from the front panel by radio users. These customizing functions can also be restricted, depending on the radio settings.
 
Optional Bluetooth® Headset Connectivity
With the optional UT-133A Bluetooth® unit, the IC-A120E can be used with a third-party wireless Bluetooth® headset. Also, using the optional VS-3 Bluetooth® headset, the side tone function is available.
 
Active Noise Cancelling (ANC)
The newly added built-in ANC reduces background noise in the received and transmitting signals. This function is effective in extremely noisy airport environments full of aircraft noise. The automatic noise limiter (ANL)* reduces pulse-type noise such as engine ignition.

(NOTE - *The ANL and ANC functions cannot be used at the same time)

 
IP54 Dust-Protection and Water Resistance
The IC-A120E has IP54 dust-protection and water resistance.
This construction allows for use in open-air vehicles.
 
Dual-watch and ON-Hook Scan Functions
The dualwatch function checks the priority and operating channels alternatively. The ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger. When you take the microphone OFF hook, the scanning stops at the priority channel or displayed channel (according to the preprogramming).
 
Side Tone Function
When using a third-party headset with the optional OPC-871A headset adapter, the side tone function allows you to monitor your own transmitted voice via the connected headset. Even when using a hand microphone, your voice can be monitored from the headset.
 
Optional Speaker-Microphone, HM-217
Listen to received audio through the HM-217’s built-in speaker. From the speakermicrophone’s front panel, access up/down buttons and two programmable buttons (P1/P2) which can be used as a shortcut to activate frequently used functions.
 
Other Features
 
  • A total of 200 memory channels with 12-character channel names
  • Both 12- and 24- volt systems compatible
  • 8.33 kHz* and 25 kHz channel spacing * for EUR version only
  • 9W Output Power (Carrier power)
  • Dualwatch and priority channel scan functions
  • Power on password protection
  • PC programming capability
  • CI-V Commands for external control
  • VE-PG3 RoIP gateway for interconnect with other radio devices
  • Compliant with European E-marking for installation in vehicles
 
Supplied with the A120E
 
  • IC-A120 Mobile VHF Airband Transceiver Unit
  • Hand microphone, HM-216
  • DC power cable
  • Mounting bracket kit
  • Microphone hanger kit
  • Fuses
  • 9W Output Power (Carrier power
 
Mobile VHF Antenna Kit w/ Magnetic Base & Stainless Whip Antenna
The M1SW124 is a stainless steel 1/4 wave antenna suitable for all air band applications on a 5/16" fitting. The M1SW124 works best when mounted as close to the surface of the ground plane as possible. Magnetic base allows easy mounting on any vehicle roof / bonnet / boot.

Pros
 
  • Broadband
  • Receives 118MHz to 136MHz
  • Transmit 122MHz to 126MHz (covers almost 4MHz tuned)
  • No need to tune
  • No SWR meter needed
  • Can be tuned for any other part on the airband e.g. 127MHz
  • No custom mounting required
  • Portable for multiple use
  • Australian Made
 
Cons
 
  • Not as broadband as the fibreglass M124-1 but is stainless steel and almost indestuctable
 
Cable and Magnetic Base Mount
 
  • UHF Antenna Base + 4mtrs RG58CU coax cable + BNC Male Connector
 
Specifications
 
  • Length: 545mm (21")
  • Cable Length - 3.6m
  • Base: ULC4
  • Cable: 4m RG58CU Coax
  • Connector: BNC
NOTE: If a fixed mount antenna is required please contact flightstore and we can swap out the magnetic base type for a fixed mount antenna.
 

(IC-A120-MOBILE-KIT)

SKU IC-A120-MOBILE-KIT
Brand Icom
Shipping Weight 6.0000kg
Unit Of Measure ea
Be The First To Review This Product!

Help other Flight Store Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought
Air Gizmos Aera 660 Panel Dock
Air Gizmos Aera 660 Panel Dock

PD28

$250.00

Icom IC-A120E Airband VHF Base Station Kit
Icom IC-A120E Airband VHF Base Station Kit

IC-A120-BASE-KIT

$2,295.00

3% OFF RRP $2,369.00
Icom IC-A220 Non-TSO Airband VHF Mobile Kit
Icom IC-A220 Non-TSO Airband VHF Mobile Kit

IC-A220-MOBILE-KIT

$2,550.00

7% OFF RRP $2,745.00
Icom IC-A25CE Airband VHF Handheld Transceiver (Non Bluetooth) 6 Watt (PEP)
6% OFF RRP $525.00
Icom IC-A16E Airband VHF Handheld Transceiver (Non Bluetooth Version) 6 Watt (PEP)
Icom IC-A16E Airband VHF Handheld Transceiver (Non

IC-A16E-NBT

$396.00

9% OFF RRP $435.00

More From This Category
Icom IC-A25NE Airband VHF Handheld Transceiver (Bluetooth) 6 Watt (PEP)
12% OFF RRP $880.00
Icom IC-A25CE Airband VHF Handheld Transceiver (Non Bluetooth) 6 Watt (PEP)
6% OFF RRP $525.00
Icom IC-A16E Airband VHF Handheld Transceiver (Non Bluetooth Version) 6 Watt (PEP)
Icom IC-A16E Airband VHF Handheld Transceiver (Non

IC-A16E-NBT

$396.00

9% OFF RRP $435.00
Icom IC-A120E Airband VHF Base Station Kit
Icom IC-A120E Airband VHF Base Station Kit

IC-A120-BASE-KIT

$2,295.00

3% OFF RRP $2,369.00
Icom IC-A220 Non-TSO Airband VHF Base Station Kit
Icom IC-A220 Non-TSO Airband VHF Base Station Kit

IC-A220-BASE-KIT

$2,995.00

8% OFF RRP $3,255.00