Mobile VHF Antenna Kit w/Stainless Whip Antenna

In Stock

Mobile VHF Antenna Kit w/ Stainless Whip Antenna
The M1SW124 is a stainless steel 1/4 wave antenna suitable for all air band applications on a 5/16" fitting. The M1SW124 works best when mounted onto a bracket that is as close to the surface of the ground plane as possible such as the BMS mount. (Z brackets are not recommended with this antenna)

  • Broadband
  • Receives 118MHz to 136MHz
  • Transmit 118MHz to 136MHz
  • Transmit Tuned 121MHz to 126MHz (covers almost 6MHz range tuned to provide no more than 4% loss)
  • No need to tune
  • No SWR meter needed
  • Can be tuned for any other part on the airband e.g. 127MHz
  • Australian Made
  • Not as broadband as the fibreglass M124-1 but is stainless steel and almost indestuctable
Cable and Base Mount
  • UHF Antenna Base + 4mtrs RG58CU coax cable + BNC Male Connector
  • Antenna Length: 545mm (21")
  • Cable Length - 6m
  • Base: ULC4
  • Cable: 4m RG58CU Coax
  • Connector: BNC


Please note that this antenna is tuned to favour the low end of the Airband and if possible the SWR should be checked.



Brand FlightStore
Shipping Weight 1.3000kg
Unit Of Measure ea
Be The First To Review This Product!

Help other Flight Store Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought
Icom IC-A120E Airband VHF Mobile Kit
Icom IC-A120E Airband VHF Mobile Kit



4% OFF RRP $1,730.00
Mobile VHF Antenna Kit w/Magnetic Base & Fibreglass Whip Antenna
Mobile VHF Antenna Kit w/Magnetic Base & Fibre



More From This Category