CamGuard 1 Pint

$58.00
In Stock

Pack Size

CamGuard - Available Pack Sizes - Single / 3 Pack / 6 Pack / 12 Pack
 
Complete Protection with CamGuard Aviation
Why would pilots consider an oil additive in their piston engine? How about reliability, longevity, and reduced engine maintenance cost. Face it, aircraft engines are very expensive and need to be absolutely reliable. How is it possible for an oil additive to have an appreciable effect on engine life? The answer is simple, by not allowing rust to form on highly loaded parts or deposits to build-up on critical parts; the engine continues to operate as if it were new.
 
No rust means no premature overhaul due to failed camshafts. No deposits means no sticking rings, valves or poor compressions as well as a host of other technical benefits that are real and measurable each time you send in an oil sample. Laboratory analysis typically reports a 30% reduction in wear metals, which gives peace of mind when flying in challenging conditions. Read on to understand why CamGuard provides 16 ounces of prevention and the cure to premature maintenance.
 

      
CamGuard Aviation is a blend of high performance additives that fortify piston aircraft oils to provide the utmost in engine protection. Because of FAA regulations and costs, even the newest commercial aircraft oil technology is antiquated.
 
CamGuard Aviation addresses the complex interrelated problems of corrosion, deposits and wear in air-cooled piston aircraft engines.
 
CamGuard Aviation contains powerful multi-metal corrosion inhibitors that prevent rust and corrosion in infrequently used engines. Infrequent engine use can lead to rust pits forming on cam and lifter surfaces. This pitting can result in catastrophic spalling wear requiring a premature engine overhaul.
 
CamGuard Aviation contains advanced anti-wear additives to dramatically reduce the wear of cams, lifters, cylinders, rings, gears and valve guides.
 
CamGuard Aviation prevents scuffing wear from “dry starts” by maintaining an active lubricant film on critical parts, even after periods of prolonged inactivity.
 
CamGuard Aviation utilizes unique ashless deposit control additives that prevent the formation of varnish and carbon deposits throughout the engine.
 
CamGuard Aviation use in older engines allows component motions to free up sticky rings and valves, increasing compressions and reducing oil consumption.
 
CamGuard Aviation contains seal conditioners that nullify the effects of heat and time to keep seals supple, flexible, and performing like new.
 
Testing
Four of the top selling piston aircraft oils were tested for corrosion resistance with and without the addition of CamGuard Aviation. The testing was performed at an independent laboratory utilizing the DIN 50017 humidity cabinet test. The DIN 50017 method demonstrates excellent field correlation, unlike the obsolete ASTM 1748 humidity cabinet test.
 
 
The graph indicates the average number of days until failure, which is defined as the observation of three 1mm spots of rust on the steel test panels. The red bars indicate time to failure for the untreated oils while the blue bars represent the corresponding oils with the addition of 5% CamGuard Aviation. All the oils show a remarkable improvement with the addition of CamGuard Aviation.
 
The CamGuard Story began with CamGuard Aviation which was developed as an ultra-high performance aviation product.
The photos above are pistons removed from two different Lycoming IO-540 aircraft engines. The piston on the left is from our FAA certification engine using CamGuard for 500 hours. The certification test was in an aerobatic aircraft that utilized very high power settings resulting in extremely high temperatures. The piston on the right was taken from a non-aerobatic aircraft engine that was flown at typical cruise power settings, without CamGuard, for 500 hours. The difference in deposits is striking. Because of this extraordinary experience, we expanded the CamGuard family to include other applications.
 
 
*Read product label for specific usage instructions.
 
 
ENGINE OIL CAMGUARD
1 Quart 1.6 Ounces
2 Quarts 3.2 Ounces
3 Quarts 4.8 Ounces
4 Quarts 6.4 Ounces
5 Quarts 8 Ounces
6 Quart 9.6 Ounces
7 Quarts 11.2 Ounces
8 Quarts 12.8 Ounces
9 Quarts 14.4 Ounces
10 Quarts 16 Ounces
 

(CAM-GUARD)

SKU CAM-GUARD
Brand Camguard
Shipping Weight 1.0000kg
Unit Of Measure ea
Be The First To Review This Product!

Help other Flight Store Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought
ASA Fuel Tester w/ Screwdriver
ASA Fuel Tester w/ Screwdriver

ASA-AFT-1

$17.95

PIVOT Claw Mount - Small
PIVOT Claw Mount - Small

PC-SCLS-COMP

$132.00

PIVOT Claw / Yoke Mount - Medium
PIVOT Claw / Yoke Mount - Medium

PC-MCLS-COMP

$132.00

Flight Outfitters Lift 2.0 Flight Bag
Flight Outfitters Lift 2.0 Flight Bag

FO-LIFT2.0

$169.95


More From This Category